





![]() ![]() ![]() ![]() ![]() |
![]() ![]()
![]() ![]() ![]() Woofer: 8-inch, woven kevlar cone, 1.25-inch voice coil, 25 oz magnet, bumped back plate and vented pole piece Midrange: 3-inch woven kevlar cone and rubber surround Tweeter: 1-inch titanium dome, ferro-fluid cooled, 30-degree swivel and pivot, neodymium magnet X-over: FR4 board with 18dB per octave crossover for tweeter, midrange and woofer sections ?dB attenuation switches on woofer, tweeter and midrange Polymide switch-auto protect reset switch, over power protection for midrange and tweeter 16AWG wire connection to woofer section Gold plated terminal posts will accept 14AWG wire Frequency response: 40Hz to 22KHz Sensitivity: 89dB 1W/1M Recommended amplifier power: 10 to 150W Impedance: 4 ohms/8 ohms selectable on PCB Cutout size: 9.5-inch Depth: 5.40-inch Paint mask and cut out template included Weight (pair pack): 16.75lbs Carton dimensions (pair pack): (H) 13 x (W) 12.2 x (L) 17.4-inch ![]() ![]() ![]() Products Range
![]() ![]()
Contact Info:
![]() ![]() Global Brands Development
|


